2-component ADHESIVE GLUE REPAIR KIT-SET for inflatable boat, kayak, SUP

Description

INSTRUCTIONS FOR USE OF ADECO ADEGRIP PVC ADHESIVE

Two-component polyurethane adhesive for the repair of PVC boats and other PVC surfaces (kayaks, SUP boards, and similar products where 100% sealing is required).

KIT CONTENT:

• 125 ml ADEGRIP PVC adhesive

• 5 ml catalyst (activator)

• 5 ml cleaner (cleaner)

• 1x fabric 12 × 12 cm

• Brush for application

• Reusable

• Shelf life in the original packaging: 5 years

️ INSTRUCTIONS FOR USE

1. PURPOSE

The two-component polyurethane adhesive ADEGRIP PVC is designed for gluing and repairing PVC products such as boats, kayaks, SUP boards, tarps, and covers. In combination with the catalyst, it forms a strong, elastic, and waterproof bond.

2. SURFACE PREPARATION

The surfaces must be clean, dry, and degreased.
It is recommended to use ADECO Cleaner 264 or pure alcohol/aceton.
Lightly sand the surface with very fine sandpaper.
Mark the area to be glued with a pencil to ensure the patch is placed accurately.

3. ⚗️ PREPARATION OF ADHESIVE

Add 5-8% catalyst to the adhesive (5 ml included is sufficient for the entire amount of adhesive).
Mix thoroughly until you obtain a homogeneous mixture.
After mixing, wait for 5 minutes (partial hardening).
Use the mixture within 3 hours.

4. ADHESIVE APPLICATION

1st layer: Apply a thin layer of adhesive to the damaged part of the boat and wait for 5 minutes.
2nd layer: Apply a thin layer to the patch and wait for 5 minutes.
3rd layer: Apply a thin layer to the patch again and let it dry for 5-10 minutes.
All layers should be very thin.

5. REACTIVATION OF THE ADHESIVE (for more demanding repairs)

Heat the surface with warm air (hairdryer or IR light) until the adhesive becomes lukewarm to the touch.
Do not overheat – the goal is reactivation, not drying.

6. GLUING

Precisely align the patch and press it firmly.
Release air bubbles with your thumbs from the center outward.
Use a roller or a piece of wood for better pressure.
Carefully remove excess adhesive with the cleaner.

7. DRYING / HARDENING

Allow the repaired product to rest for at least 24 hours before inflating.
Full curing is achieved after 72 hours – only then is it safe for exposure to water, sunlight, or use.

⚠️ SAFETY INSTRUCTIONS
DANGER (H-statements)

H225: Highly flammable liquid and vapour
H319: Causes serious eye irritation
H336: May cause drowsiness or dizziness
H412: Harmful to aquatic life with long-lasting effects
EUH066: Repeated exposure may cause dry or cracked skin

️ SAFETY MEASURES (P-statements)

P210: Keep away from heat, sparks, open flame – no smoking
P264: Wash hands thoroughly after use
P280: Wear protective gloves, clothing, and protect eyes/face
P304 + P340: IF INHALED: Move the person to fresh air
P312: If feeling unwell, contact a POISON CENTER or doctor
P370 + P378: In case of fire, use CO₂, dry chemical powder, or water mist
P501: Dispose of contents/container in accordance with local regulations

STORAGE

Store at room temperature (15-25°C)
Do not expose to freezing or temperatures above 40°C
Always shake well before use