INSTRUCTIONS FOR USE \u2013 ADECO ADEGRIP PVC ADHESIVE (65 ml)<\/strong> CONTENTS:<\/strong><\/p>\n 2 x repair patches\/flaps available in different colors (select color and write your note in the comment when placing the order)<\/p>\n<\/li>\n 2 x 65 ml ADEGRIP PVC adhesive (in tube)<\/p>\n<\/li>\n No additional accessories included (no cleaner, patches, or brush)<\/p>\n<\/li>\n Shelf life in original packaging: 5 years<\/p>\n<\/li>\n<\/ul>\n \ufe0f INSTRUCTIONS FOR USE<\/strong><\/p>\n ADEGRIP PVC is a 1-component polyurethane adhesive specifically designed for bonding and repairing PVC material products \u2013 such as boats, kayaks, SUP boards, tarpaulins, tents, etc. The surfaces to be bonded must be clean, dry, and degreased. 1\ufe0f\u20e3 First layer:<\/strong> 2\ufe0f\u20e3 Second layer:<\/strong> 3\ufe0f\u20e3 Third layer:<\/strong> All layers must be very thin to avoid excess adhesive and ensure proper bonding.<\/p>\n When the adhesive becomes tacky to the touch (not wet), carefully align the patch with the marked area and press it down firmly. If necessary, remove excess adhesive with a tissue and an appropriate solvent (e.g., alcohol) \u2013 gently.<\/p>\n Allow the bonded surface to rest for at least 24 hours before inflating or loading the product. \u26a0\ufe0f SAFETY WARNINGS<\/strong> H225: Highly flammable liquid and vapor<\/p>\n<\/li>\n H319: Causes serious eye irritation<\/p>\n<\/li>\n H336: May cause drowsiness or dizziness<\/p>\n<\/li>\n H412: Harmful to aquatic life with long-lasting effects<\/p>\n<\/li>\n<\/ul>\n SAFETY MEASURES (P-statements):<\/strong><\/p>\n P210: Keep away from heat, sparks, open flames \u2013 no smoking<\/p>\n<\/li>\n P264: Wash hands thoroughly after use<\/p>\n<\/li>\n P280: Wear protective gloves, clothing, and eye\/face protection<\/p>\n<\/li>\n P304 + P340: IF INHALED: Move the person to fresh air<\/p>\n<\/li>\n P312: Call a POISON CENTER or doctor if you feel unwell<\/p>\n<\/li>\n P370 + P378: In case of fire, use CO\u2082, extinguishing powder, or water mist<\/p>\n<\/li>\n P501: Dispose of contents\/container in accordance with local regulations<\/p>\n<\/li>\n<\/ul>\n Store at room temperature (15\u201325 \u00b0C)<\/p>\n<\/li>\n Do not expose to freezing temperatures or heat above 40 \u00b0C<\/p>\n<\/li>\n Always seal the tube well after use<\/p>\n<\/li>\n<\/ul>\n We recommend using only this tested, professional adhesive from a reputable Italian manufacturer. Incl. 22 % TAX<\/span><\/p>\n
1-component polyurethane adhesive for repairing PVC boats and other PVC surfaces<\/strong> (such as kayaks, SUP boards, and similar products where 100% sealing is required).<\/p>\n
\n\n
\n1. INTENDED USE<\/h3>\n
It forms a flexible, durable, and waterproof bond without the need for any additional hardener or activator.<\/p>\n
\n2. SURFACE PREPARATION<\/h3>\n
It is recommended to clean the area before bonding using alcohol or acetone.
For better adhesion, lightly sand the surface with very fine sandpaper.
If necessary, mark the bonding area with a pen for accurate patch placement.<\/p>\n
\n3. APPLYING THE ADHESIVE<\/h3>\n
Apply a thin layer of adhesive to the damaged area and let it dry for approximately 5 minutes.<\/p>\n
Apply a thin layer of adhesive to the patch and let it dry for around 5 minutes.<\/p>\n
Once more, apply a thin layer of adhesive to the patch and leave it to dry for 5\u201310 minutes.<\/p>\n
\n4. BONDING<\/h3>\n
Push out any air bubbles by pressing from the center toward the edges.
Use a roller or a smooth object to apply even pressure.<\/p>\n
\n5. DRYING \/ CURING<\/h3>\n
Full strength and waterproof performance are reached after 72 hours of drying at room temperature.<\/p>\n
\n
DANGER (H-statements):<\/strong><\/p>\n\n
\n\n
\nSTORAGE<\/h3>\n
\n
\n
Using adhesives from other producers may result in serious damage to your watercraft.<\/p>\n","protected":false},"excerpt":{"rendered":"